DONGGUAN, CHINA, Aug 25, 2026 — YXY Electronics today announced worldwide availability of the YPM20-CAT6CAT6-2, an IP68-rated waterproof RJ45 CAT6 inline coupler engineered for permanent outdoor installation. Produced at the company’s 20,000 m² facility in Dongguan, the M20 threaded coupler targets the most common failure point in outdoor Ethernet infrastructure — moisture ingress at field terminations — for smart-city, industrial IoT, marine, and renewable-energy networks.
The limits of conventional Ethernet in the field
Outdoor networks are the backbone of smart cities, roadside infrastructure, solar farms, satellite ground stations, and enterprise campus backhaul. Yet most field-deployed Ethernet still relies on consumer-grade RJ45 jacks designed for conditioned indoor environments — not for continuous immersion, sub-zero cold starts, or years of tropical UV exposure.
For integrators the cost is measurable: moisture-related link failures, repeat service visits, and warranty call-backs that quietly erode project margin. The YPM20-CAT6 series is engineered to remove that failure mode at its source.
Design and construction
The YPM20-CAT6CAT6-2 combines a full IP68 seal, a PA66 nylon housing rated UL94-V0, silicone sealing glands, gold-plated copper contacts, and a standard M20 threaded lock in a compact round form factor. Installers gain the plug-and-play behaviour of a conventional coupler with the environmental rating of an industrial circular connector — no new tooling, custom housings, or cable-system redesign.
Field-critical characteristics
- Full IP68 waterproofing. Dust-tight and rated for continuous immersion. The sealing gland and threaded lock extend IP-rated protection across the complete cable run — through rain, washdown, and seasonal flooding.
- Universal CAT6 performance. The pass-through design supports shielded (STP) and unshielded (UTP) wiring to the CAT6 standard and remains compatible with CAT6A and CAT7 cabling, preserving gigabit signal integrity end-to-end.
- Multi-role feed-through form factor. Serves as an inline coupler, panel bulkhead, or heavy-duty extension joint for cameras, outdoor access points, switch enclosures, and field cabinets.
- Durable PA66 nylon construction. UV-resistant and shock-tolerant, with integrated strain relief and EMI shielding — available as stocked standard units or custom-length cable assemblies.
- Tool-free installation. Insert the cable into each side and lock the M20 thread — a sealed, secure joint in under a minute, with no special tooling required on site.
Technical specification
| Parameter | Value |
|---|---|
| Product Name | IP68 Outdoor Waterproof RJ45 CAT6 Inline Coupler — M20 PA66 nylon, 8-pin Gigabit Ethernet extension |
| Model Number | YPM20-CAT6CAT6-2 (pigtailed variant: YPM20-CAT6CAT6-01) |
| Type | Ethernet connector — inline coupler |
| Network Category | CAT6 / Gigabit Ethernet (CAT6A / CAT7 compatible) |
| IP Rating | IP68 — fully dust-tight, continuous immersion |
| Gehäusematerial | Nylon PA66 (UL94-V0 flame retardant) |
| Contact Material | Copper, gold plated |
| Sealing Material | Silicone |
| Thread Size | M20 |
| Connection | Female–female, threaded screw lock, tool-free |
| Contacts | 8P8C RJ45 |
| Rated Current | 2.4 A |
| Rated Voltage | 250 V |
| Betriebstemperatur | -40°C ~ +105°C |
| Features | IP68 waterproof, dustproof, UV resistant, EMI shielded |
| Zertifikate | CE / FCC / RoHS |
| Colour | Black |
| Anwendungen | Data communication, outdoor power, CCTV, industrial networking, smart city, Starlink / satellite backhaul |
| Place of Origin | Dongguan, Guangdong, China |
| Warranty | 3 years against defects in material and workmanship |
Full datasheet PDF and 3D STEP files available on request.
Where the coupler earns its keep
- Smart-city and roadway CCTV. Replace failed keystone jacks across multi-camera districts with a single SKU and eliminate repeat service calls during rainy commissioning windows.
- Outdoor Wi-Fi 6 and 5G small cells. Permanently seal fibre–Ethernet handoff boxes and tower cable entry glands in hurricane-prone regions.
- Solar and inverter monitoring. Run RS485-over-Ethernet gateways across tracker rows without dust-related or water-ingress warranty claims.
- Marine shipboard LAN and offshore telemetry. The continuous-immersion rating matches real washdown exposure and bilge humidity in port installations.
- Mining, tunnel, and underground infrastructure. Built for dust-laden forced-air ventilation, rig vibration, and seasonal flooding.
- Satellite and fixed-wireless extension runs. Extend gigabit runs from dish or antenna to the indoor router without losing outdoor IP protection.
- Factory-floor IIoT, SCADA, and EtherCAT. Extend cabinet-to-cabinet backbone links without new bulkheads or custom harnesses.
Manufacturing and supply
The YPM20-CAT6 series is produced at YXY Electronics’ Dongguan facility (Dongguan Yuelong Electronic Technology Co., Ltd.) — a 20,000 m² plant operating five automated production lines with a monthly output capacity of 300,000 connectors. Every unit undergoes 100% in-line inspection before packaging and is covered by a three-year warranty against defects in material and workmanship. ODM/OEM branding, including logo printing on product and packaging, is available on volume orders.
Availability and logistics. Samples ship within 1–3 business days; standard production runs complete in 7–14 days; volume orders are fulfilled from continuous stock in 1–2 weeks. Express delivery via DHL, UPS, FedEx, or TNT reaches most markets in 2–5 days, with air and sea freight (LCL/FCL) available for container programmes. Sample the related YPM20-CAT6-A02 waterproof RJ45 panel connector in the YXY online store, or purchase directly from the official Alibaba listing.
Product gallery — YPM20-CAT6 series
About YXY Electronics
YXY Electronics designs and manufactures industrial waterproof connectors for data, power, and signal applications. Drawing on 18 years of production engineering at its Dongguan Yuelong facility, the company’s portfolio spans IP68-rated Ethernet couplers, M-series circular connectors, panel-mount entries, and custom overmoulded cable assemblies — supported by in-house tooling, inline quality control, and ODM/OEM programmes serving customers worldwide.
Media contact. YXY Electronics — Product Marketing: waheed@yxydz.com, +86 156 9778 8068. Editorial samples and project-specific photography available on request.
Häufige Fragen
What IP rating does the YPM20-CAT6 coupler have?
IP68 — fully dust-tight and rated for continuous immersion. The silicone sealing gland and M20 threaded lock keep moisture out across the complete cable run.
Is the YPM20-CAT6 compatible with CAT6A and CAT7 cable?
Yes. The pass-through design supports shielded (STP) and unshielded (UTP) wiring to the CAT6 standard and remains compatible with CAT6A and CAT7, preserving gigabit signal integrity end-to-end.
What temperature range can it withstand?
The PA66 (UL94-V0) nylon housing is rated from -40°C to +105°C, covering sub-zero cold starts and years of tropical UV exposure.
Where can I buy the YPM20-CAT6 series?
Samples ship within 1–3 business days and standard production runs complete in 7–14 days. Order through the YXY online store, the official Alibaba listing, or contact sales at waheed@yxydz.com for OEM/ODM programmes.
IP ratings, material composition, current and voltage ratings, and environmental specifications reflect factory laboratory data under controlled test conditions. Field installers should follow local electrical code and verify sealing glands after every cable insertion.
Antwort hinterlassen